JL Audio Gotham g213, Owner'S Manual

Page: 22 / 36

| Gotham g213 Page 22
SYSTEM CONNECTION DIAGRAM 1:
One Gotham to
Home Theater Receiver or
Home Theater Preamp/Processor
Most home theater receivers and
preamp/processors provide a single
(mono) subwoofer output. When
connecting a mono subwoofer output
to your Gotham, you will only use the
Gotham’s “Left or Mono” input.
Two connection types are available
for connecting the Gotham to your
home theater system: balanced (XLR or
1/4-inch TRS connector) and unbalanced
(RCA-type connector). Balanced
connections provide superior noise
rejection and ensure proper grounding
between components. If your receiver or
processor has balanced outputs, we highly
recommend that you use them.
In the connection diagram at left ,
balanced connections are shown as solid
lines, unbalanced connections are shown
dotted. You will only use one of these
input connection methods (not both).
SUB REAR
REAR CENTER
FRONT
FRONT
R
L
PRE OUT
PROCESSOR (BALANCED OUTPUTS) RECEIVER / PROCESSOR (UNBALANCED OUTPUTS)
OR
OUTPUTS
g213
GOTHAM REAR CONTROLS (MASTER)
WARNING! TURN OFF THE GOTHAM AND ALL OTHER EQUIPMENT IN THE
SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
WARNING