background image

Thank you for purchasing a JL Audio FiX™ OEM  

interface / processor for your automotive sound system. 

This product has been designed and manufactured to exacting  

standards in order to ensure years of musical enjoyment in your vehicle. 

For maximum performance, we highly recommend that you have your 

FiX™ 82 installed by an authorized JL Audio dealer. Your authorized 

dealer has the training, expertise and installation equipment to ensure 

optimum performance from this product without compromising your 

vehicle’s functionality. Due to the complexity of modern vehicle systems, 

we do not recommend self-installation unless you have extensive 

experience in automotive electrical systems. Should you decide to install 

this product yourself, please take the time to read this manual  

thoroughly to familiarize yourself with its installation requirements  

and setup procedures.

If you have any questions regarding the instructions in this manual or  

any aspect of the product’s operation, please contact your authorized JL 

Audio dealer for assistance. If you need further assistance, please contact 

the JL Audio Technical Support Department at [email protected]  

or call (954) 443–1100 during business hours.

OWNER’S MANUAL

Summary of Contents for FIX 82

















Reviews: