background image

Page 31

 | Fathom 

f112 & f113

FREQUENTlY ASKED QUESTIONS

Can I place objects on my subwoofer?

We do not recommend placing any items on the subwoofer cabinet as they may 

vibrate, causing undesirable noise and possible damage to the finish. Under no 

circumstances should any object containing liquid be placed on the Fathom cabinet.

Is the Fathom magnetically shielded?

Fathom subwoofers are not magnetically shielded.  To avoid magnetic distortion 

with certain television types, place the Fathom at least 3-4 feet (1 - 1.5m) from 

your screen.  If you notice any discoloration in the picture, try moving the 

subwoofer further away until these artifacts disappear.  

Will my electric bill be high if I leave the Fathom in “Auto” mode?

When in “Auto” mode, the Fathom amplifier is only powered up when a 

significant signal is detected on the inputs.  When powered down, only 

“housekeeping” circuits remain on, which draw negligible amounts of power 

from the wall (less than 5 watts).  

Should I unplug my subwoofer during a thunderstorm or extended absence?

YES. You should unplug your Fathom during (or before) thunderstorms.  This 

will prevent any possible damage from voltage spikes due to lightning.  In these 

conditions, it’s a good idea to unplug all of your audio / video components.  If you 

are going to be away from home for several days, it is also a good idea to unplug 

your home theater components to prevent damage from unexpected storms or 

power line conditions.  

Summary of Contents for Fathom f112





































Reviews: