JL Audio C2-400x, Owner'S Manual

Page: 3 / 8

2 | JL Audio - C2-400x Owner’s Manual
3
C2-400x sPeCiFiCaTions:
Woofer: Injection-molded, Mica-filled, Polypropylene Cone,
Butyl Rubber Surround, 1 in. Voice Coil on Kapton® Former,
Flat, Symmetrical Roll Spider, Ferrite Magnet
Tweeter: 0.75 in. (19 mm) Silk Dome, Ferrofluid Cooling /
Damping, Neodymium Magnet
Crossover: Natural Roll-Off Low-Pass, 1st Order High-Pass
Filter with Electrolytic Capacitor
Continuous Power Handling: 35 Watts
Recommended Amp Power:
10-50 Watts per channel (RMS)
Efficiency:
84.5 dB @ 1W/1m | 90.5 dB @ 1W/0.5m
Sensitivity:
87.5 dB @ 2.83V/1m
Nominal Impedance:
4 ohm
Frequency Response: 71 Hz - 22 KHz ± 3 dB
Included Components and Parts:
• Two C2-400x 4.0-inch (100mm) Coaxial loudspeakers
• Two Grille Assemblies
• Eight #8 x 1-inch (25mm) sheet metal screws
• Eight Mounting Clips
• Two 4x6-inch (100 x 150 mm) Adaptor Plates
• Two 5.2 mm female crimpable connectors
• Two 2.8 mm female crimpable connectors
• Four #8 x 0.315-inch (8 mm) sheet metal screws
• Two self-adhesive JL Audio logo name badges
GeTTinG sTarTeD
•Turnofftheaudiosystem.Itisalso
advisabletodisconnectthenegative(–)
terminalofyourvehicle’sbatterywhenever
performinginstallationwork.
•Beforecutting,drillingorinsertinganyscrew,
checkclearancesonbothsidesoftheplanned
mountingsurface.Alsocheckforanypotential
obstacles,suchaswindowtracksandmotors,
wiringharnesses,etc.Checkbothsidesofthe
vehicle,manyvehiclesarenotsymmetrical!
•Alwayswearprotectiveeyewear.
sPeaKer PlaCemenT ConsiDeraTions
Inmostcases,yourspeakerswillbeplacedinto
factoryspeakerlocations.Ifyouhavesomespeaker
mountingflexibility,keepthefollowinginmind:
Lowermountinglocations,suchasthelowerfront
cornerofadoororakick-panelprovidethegreatest
pathlengthdistancesforthesoundemittedbythe
speakers.Forthisreason,theyaregenerallymore
desirablethanhighermountinglocations.Higher
mountinglocationswillusuallyresultinextreme
near-sidesoundstagebiaswhichcompromisesthe
stereolisteningexperience.