Page 6 • JL Audio, Inc., 2017
Continued on Next Page
S T E P 48
Connect speaker cable to the barrier strip on
the side of the enclosure, and route the cable
as necessary.
Reinstall the lower seat bracket trim panel, as
shown.
S T E P 47
Pictured is the lower seat bracket trim panel
after cutting.
S T E P 46
Carefully cut along the marks to remove the
two sections of the lower seat bracket trim
panel, as shown.
S T E P 45
Remove the clips, and remove Template.
S T E P 44
Mark the left and middle sections in the
Template onto the lower seat bracket trim
panel.
S T E P 43
Tape the two halves of the Template together,
position the template over the lower seat
bracket trim panel, and secure using a pair of
factory clips, as shown.
S T E P 42
Place the lower seat bracket trim panel on a flat
surface, as shown.
S T E P 41
Align the threaded inserts in the side of the
enclosure with the slots in the two Brackets.
Secure the enclosure to each bracket using a
pair of 1/4 - 20 x 1” Serrated Flange Head Bolts,
and fully tighten.
Fully tighten the two 1/4 - 20 x 1” Serrated
Flange Head Bolts holding the Brackets to the
frame rails.
SB-Y-YXZ1/10TW3 INSTR_SKU# 011479
