Continued on Next Page
SMS-P-987C INSTR_SKU# 011358
Page 8 • JL Audio, Inc., 2013
S T E P 3 6
Remove the fuse panel cover from the driver’s kick panel.
Unscrew and remove the kick panel.
S T E P 4 0
Carefully route the wires around the battery to the passenger
side. Cover the wiring with 1/2” Loom as shown.
S T E P 3 5
Route the 12 Gauge Speaker Cable under the sill panel up to
the driver’s kick panel.
S T E P 3 9
Remove the battery cover and the plastic panels on either
side of the battery. Unscrew and remove the plastic panels
inside the storage area as well.
S T E P 3 4
Carefully unclip the sill panel.
S T E P 3 8
Drill a 9/16” hole in the firewall in the location shown. Snap
in a Grommet and route all the wires through the Grommet.
Reinstall the kick panel and sill panel.
If using the HD-RLC Remote Level Control, route its wire
to the desired remote location and pass it through the
Grommet as well. Follow the instructions included with the
HD-RLC for proper mounting procedure.
S T E P 3 3
Remove the screw cover on the driver’s side sill panel, and
remove the screw.
S T E P 3 7
Connect a Fuse Tap to the appropriate fuse as listed below:
Base System:
Fuse 6, Row C
Premium System:
Fuse 2, Row C
Do not install the fuses at this time. Connect Remote Turn-
on Wire to the Fuse Tap