Continued on Next Page
SB-P-996/13TW5v2 INSTR_SKU# 011334
S T E P 1 2
Pictured is the empty cargo area.
S T E P 1 6
From the engine bay, insert the assembly up through the
empty grommet hole.
S T E P 1 1
Carefully remove the upper carpeted panel.
S T E P 1 5
Place a 3/8” Split Lock Washer, a 3/8” x 1-1/4” Fender Washer,
and a 3/8” Nylon Washer over a 3/8 - 16 x 1-3/4” Hex Bolt.
S T E P 1 0
Reinstall the rear trim panel clips.
S T E P 1 4
From the engine bay, remove the air intake tube as shown.
S T E P 9
Carefully unclip the rear trim panel as shown.
S T E P 1 3
Remove the two grommets near the back of the vehicle as
shown.
Page 4 • JL Audio, Inc., 2016
