JKEXER VIGOR 735, Owner'S Manual

Page: 13 / 20

COMPUTER INSTRUCTION
(A) SAFETY KEY
Safety Key is for the operation and emergency stop. Before beginning a workout session ensure
safety key is securely attached to an article of your clothing.
(B) FAST/SLOW BUTTON
They are for adjusting Speed, choosing Program, and for doing pre-set.
(C) START BUTTON
It’s to start the machine and gures 3 to 1 will count down in the window before machine starts.
(D) STOP BUTTON
It’s to stop the machine. Press 1st time is for temporary stop, and press 2nd time is to reset.
(E) ENTER BUTTON
It’s for entering function.
(F) PULSE SENSOR PLATE
Both hands must hold on two plates at the same time to read your heart beat on the computer.
FUNCTIONS DISPLAY
TIME : Count up; Accumulates total working time from zero to 99:99
Count down; Counts the preset working time backwards to zero to stop running.
DISTANCE : Count up; Accumulates total working distance from zero to 99.9KM or MILES. (0.1
means 100 meters).
Count down; Counts the preset gure backwards to zero to stop running.
CALORIES : Count up; Accumulates calories consumption during exercise from zero to 999 KCAL.
(1 means 1 KCAL.)
Count down; Counts the preset gure backwards to zero to stop running.
PULSE : It shows your heart beat when holding sensor plates on two handle bars.
LAP : There are 40 lights on the Dot Matrix for 400 meters lap. When the machine starts, the
light will jump to next one after running to 10 meters.
SPEED : Display the desired running belt speed. The speed can be adjusted from Min.
0.5MPH/0.8KPH to 10MPH/16KPH by 0.1 increments by pushing FAST or SLOW
buttons).
LEVEL : From 1 to 3.
MASTER POWER SWITCH LOCATION
To complete shut off power to the treadmill, turn off master power switch and unplug from outlet .
11