JKEXER MultiGym G9985C, Owner'S Manual

Page: 6 / 17

Step 1:
Insert Cap (25) into the Base Tube (B , C).
Step 2 :
Insert Weight Tube (E) into Stand Tube (C), fix with Bolt (42) and Washer (53 ) .
Step 3 :
Assemble Base Tube ( B,C ) as drawing with Bolt ( 39 ), Washer ( 53 ), and Nut (50).
Step 4 :
P lace Stand Tube (A) onto Base Tube (B), fix with Bolt (39), Washer (53), and Nut (50). Insert
Cap (26) into upper and lower end of Stand Tube (A).
Step 5:
Firstly, insert Rubber Ring (22) into Weight Tube (E). Then, Insert Weight Stack (6) a nd Weight
Stack (5) into Weight Tube (E).
Step 6:
Insert Steel Rod (35) into the first hole of Lead Bar (18) and insert Lead Bar (18) into the
bottom of Weight Stack (5). Then use the washer and bolt from Cable (8) to fix it.
Step 7:
Place Top Tube (D) onto top of Stand Tube (A) and Weight Tube (E) and fix with Bolt (42
&
41),
Washers (53
)
, Nut (50) and Plate (T).
Step 8:
Insert Cap (23, 26) into Top Tube (D).
Step 9:
Use Bolt (46) and Nut (51) to fix Knob Tube (34) on the U-bracket of Stand Tube (A). Screw
Knob (30) into Knob Tube (34).
5