JKEXER Acute 3925, Owner'S Manual

Page: 8 / 12

6
RESISTANCE ADJUSTMENT:
Pedalling resistance is controlled by the tension knob located under the handlebar. To
increase resistance, turn the tension knob clockwise. To decrease resistance, turn the
tension knob counter clockwise.
SPECIAL NOTICE:
Every time before riding, make sure both pedals are securely tightened.
After finishing riding, use a dry rag to clean sweat and dust off for the whole unit.
Especially please clean the flywheel, all the metal tube and parts to avoid rusting.
SEAT ADJUSTMENT:
Proper seat adjustment is critical to exercise
efficiently and avoid the risk of injury. To
determine whether the seat is properly, adjust
seat on the exercise bike, place one pedal in
the down position and enter your foot over the
center of the pedal. Your leg should be only
slightly bent. If you are stretching or your leg
isn't extended sufficiently the seat should be
adjusted as required.
After adjusting it is very important to make sure
that the seat locking pin is securely locked into
position.
1. To adjust the height of seat simply turn the
ADJUSTABLE KNOB loose. Then pull the
knob and move the seat up or down to the
desired height. (there are different seat
height positions) .
2. To adjust the seat position. Turn the fixing knob loose then pull the knob to move the
seat to the desired position. After adjusting it is very important to make sure that the
seat locking pin is securely locked into position.
HANDLEBAR ADJUSTMENT:
To adjust height of handlebar, simply turn
the ADJUSTABLE KNOB loose then pull the
knob and move handlebar post up or down
to the desired height. There are 6 holes for
adjustment.
Operating Instruction