JKDC SECURITY Co Limited
www.jkdcsecurity.com
3
Two-Way (PASS1.PASS2) dry contact (or level) control signal input for controlling
electromagnets and legal signal indicating lights at the in and out direction
Two-Way (FAL1, FAL2) dry contact (or level) status input for the control of illegal signal
indicating light
Two-Way DC12V (DOOR1, DOOR2) legal connection, for connecting any kinds of controllers
and various consumption devices
5. Turnstile Interior Module
1) The turnstile mechanical interior module is for manual pushing of the turnstile bar after the
control of the turnstile is released; After a passenger passes the turnstile, another bar of the tripod
stays still after it passes the hydraulic pressure cushioning device of the interior module. Then,
another passenger can only be released (passing the turnstile) after the control of the turnstile is
released again. Pushing of the bar only requires 0.5Kg force.
2) The interior module of the electronic turnstile consists of three parts:
a) Mechanical Part: (The mechanical structure has been installed and tested to be acceptable
before it is delivered, so the user does not need to adjust it.)
b) Electrical Part:
Open-close Electromagnet: DC24V power supply, one piece of electromagnet at each of the
left and right side. (For Two directions). For unidirectional usage, only connect the power
supply at one side)
Bar Dropping Electromagnet: DC24V power supply(The position of the electromagnet can
be adjusted.)
Micro-active Switch: (Travel Switch) When the bar of the turnstile turns 120 degrees, the
micro-active switch will transmit the reset signal to the control board, and then the control
board sends instructions to reset the turnstile. (One passenger passes)
c) Cushioning Device: An oil buffer (Model: AD1410-5) made in Taiwan is used. The buffer
can be used to adjust and control the reset speed of the turnstile bar. When the bar turns too
quickly and there is bumping noise, change the value of it from small to large (0-8) until
sound result is obtained. The turnstile has been adjusted and tested to be acceptable before it
is delivered. After it is used for a certain period and somewhat large bumping noise is heard,
you can adjust the buffer appropriately.
6. Decorative Facing Cover:
For Tripod Turnstile, two decorative facing covers are installed at each side of the housing. The
covers are made by 50mm thick PVC materials.
On the standard decorative cover, the words
“
Please put in your card here
”
are printed using
silk-screen printing method. The background of the decorative cover is white, and other words can
also be printed as may be required by customers. The system integrator can install different user
interfaces according to the users
’
requirements, such as IC card reader, magnetic card reader,
fingerprint scanner, status indicating light, exit button equipment, etc.
Size of the Decorative Cover: 200mmX90mm
