Operation
5
Operation
Record/Playback Button
The
Record/Playback
button selects
which signal will be sent down the
phone line; the handset microphone,
or the
<To Phone>
cable.
Recording (Position: Out)
1.
Make certain the Record / Playback
button is in the Out position.
2.
Then start your recording from your
software controls.
3.
The level of the audio sent into
your PC can be adjusted from the
back of the unit. Place a small
screwdriver into the hole marked
To PC
Vol.
and turn…
Clockwise:
Raise Level
Counter-clockwise:
Lower Level
This is a passive unit so the signal
can not be raised above mic level.
Play (Position: In)
1.
Make certain the Record/Playback
button is in the
In
position.
2.
Start the audio playing on your
computer.
3.
Select the appropriate position on
the
Handset Type
switch.
4.
The audio playing on your computer
will be sent down the telephone line
to the other end of the call and to
the handset earpiece. The handset
microphone is disconnected while
Voice Path is in the
Play
position.
