11
10
BSET-HS1
Wireless Headset
Help & Tips
Technical Information
Help & Tips
replaceable. Please contact JK Audio
or a factory authorized service center
for battery replacement.
The BSET-HS1 is equipped with a
rechargeable lithium-Ion battery. These
batteries do not have a “charging
memory” and can be recharged at
any time without changing their life
expectancy.
Battery capacity and life span may
be reduced if the device is exposed
to extreme high or low temperatures,
The headset may stop working until
it is back to room temperature. To
get the most out of your headset, the
battery should not be allowed to fully
discharge. If this unit is not in use, the
battery should be recharged at least
every 90 days. The lithium-Ion
battery in this device is not user
Battery Information
Specifications
Standard:
Bluetooth 2.1 + EDR
Profiles:
Hands-Free 1.5, Headset
Frequency Response:
300Hz-3400Hz
Distance:
33 ft ( 10 meters );
66 ft ( 20 meters ) w/ BlueSet
weight:
2 ounces ( 53 grams )
Specifications
Trouble Shooting
•
If the headset stops functioning,
even though it is fully charged:
Reset the headset by switching it
off, wait for 15 seconds and then
turn it on again. You might try to
reset the phone as well.
If you are having problems
connecting the headset to your
phone, do as follows:
•
Check that the headset is charged,
turned on and within 33 ft. of
the phone.
•
Check that
Bluetooth
wireless
technology is enabled on
your phone
•
Check that the headset is listed as
a headset device in your phone and
also connected. You may need to
re-connect to the headset.
•
Try removing the headset
from the phone, then pair and
connect again.
If you are having problems
connecting to your JK Audio
BlueSet
•
Your BlueSet may be in
Idle Mode
.
Be sure that the BlueSet is in
Pairing Mode,
for more details
see pg 8.
Note:
If you are still having
difficulties,
your phone may not be supported.
Contact us for a list of supported models.
