● Please make sure that the clockwise and the counter-clockwise propellers are installed on
the correct motors, because the drone will not fly normally for improperly installed propellers.
● Be careful when installing the propellers, as they are a little sharp.
● Please use JJRC propellers for this drone.
● Extra propellers can be ordered additionally.
!
!
Attention: The battery should be installed firmly; failure to do so may affect the flight safety
of your drone. The drone may crash due to power-cut during the flight.
Product Assemble
●Attach the Propellers:
Install propeller A and propeller B on the corresponding motor shaft and fix the rotor propellers tightly by
rotating them as per the “lock” direction showed on the propellers (indicated as Pic.1).
●Detach the Propellers:
Fix the brushless motor by rotor propellers changing tool and then rotate and remove the propellers as
per
the “unlock” direction showed on the propellers (indicated as Pic.2).
B
B
B
B
A
A
A
A
Pic.1
B
B
B
B
A
A
A
A
Pic.2
How to Attach and Detach the Propellers
Slide the battery into the battery compartment at the rear of the drone by pushing with appropriate
force, the drone will make beep sounds with LED lights flashing. Make sure that you hear a click
sound indicating the battery is firmly installed. At the moment, turn clockwise 90 degrees of the lock
located at the bottom to the “LOCK” position to double confirm that the battery is installed firmly.
Battery Installation
-3-
