JJC WT-868, Manual Instruction

Page: 12 / 24

Connecting the WT-868RX:

Turn the camera and WT-868RX off.

Fix the WT-868RX on the hot shoe of camera

Lock hot shoe fixed nut tightly when you fix it.

Loosen hot shoe fixed nut when you remove the WT-868RX. Do not forcibly pull it, in order to
avoid damage to the receiver and camera.

Remove the remote socket cover from the camera.

Insert the shutter release plug into the remote socket of camera.

Insert the input plug into the ACC socket of WT-868RX.

Turn the camera and WT-868RX ON.

Use the channel Increase or reduce button to select the channel to match the WT-868TX.

Now you can start program the function and enjoy the timer trigger.

After programming, press the stop/start button of the WT-868TX to send the data to the WT-868RX
and start the timer.
Disconnecting the WT-868RX:

Turn the camera and WT-868RX OFF.

Disconnect the shutter release plug from the camera body.

Replace the remote socket cover.

Disconnect the input plug from the WT-868RX.

Loosen hot shoe fixed nut to remove the WT-868RX.