LAN Setup
Hostname
AP Local host name
IP Address
IP address for the Wireless Router, as seen from the local LAN. Use the
default value unless the address is already in use or your LAN is using a
different IP address range. In the latter case, enter an unused IP
Address from within the range used by your LAN.
Subnet Mask
The default value 255.255.255.0 is standard for small (class "C")
networks. For other networks, use the Subnet Mask for the LAN
segment to which the Wireless Router is attached (the same value as
the PCs on that LAN segment).
DHCP Server
he Wireless Router will allocate IP Addresses to PCs
on your LAN when they start up. The default (and
alue is Enabled.
using a DHCP Server, this setting must be
isting DHCP server must be re-configured to
treat the Wireless Router as the default Gateway. See the following
section for further details.
The
Start IP Address
,
End IP Address
and
Lease Time
fields set
DHCP
clients supported.
If Enabled, t
(DHCP clients)
recommended) v
If you are already
Disabled, and the ex
the values used by the DHCP server when allocating IP Addresses
to DHCP clients. This range also determines the number of
LAN2
Secondary LAN let you configure secondary local Network.
LAN2 IP Address
Configure secondary LAN2 IP address.
LAN2 Subnet Mask
Configure secondary LAN2 subnet mask.
MAC Address
Local LAN MAC address.
DHCP Type
AP Router support DHCP server on LAN. The item can choose DHCP
server is enable or disable.
Start IP Address
DHCP server assign automatically IP start address
End IP Address
DHCP server assign automatically IP end address
Subnet Mask
The default value 255.255.255.0 is standard for small (class "C")
networks.
Primary DNS
Server
The IP address of the Domain Name Server which is currently used.
Secondary DNS
Server
The IP address of the Domain Name Server which is currently used.
Default Gateway
The IP address is AP Router IP address.
Life Time (s)
DHCP server assigns IP life time. Timing is second.
20
