Recommended installation:
CAR SEATS
•
remove back harness panel.
STROLLERS
•
keep back harness panel
in place.
Place the Bundleme
®
in car seat
or stroller. Fasten the elastic strap
around the back of the car seat
or stroller. Be sure to install strap
under any attached canopies.
Do not adjust the elastic strap
too tightly - there should not be
a gap between the back of the
Bundleme and the car seat
or stroller.
If your car seat has built-in head
support, you may place the
Bundleme (with back harness
panel removed) around the
head support. This may not be
possible in all car seats.
Unzip sides and fold down the
top of the Bundleme.
