![JJ Cole Collections Broadway JRSWD Instruction Manual Download Page 11](http://html.mh-extra.com/html/jj-cole-collections/broadway-jrswd/broadway-jrswd_instruction-manual_2018664011.webp)
Section 5 - Stroller Operation and Use - Continued
19
20
Section 5 - Stroller Operation and Use - Continued
A. Unbuckle the webbing strap over the infant car
seat. Pull release handle on back of infant
car seat. Pull up on infant car seat to
remove.
14. To remove the Graco infant car seat:
Use only the following Graco infant car seats with the infant
car seat adapter:
• Graco SnugRide
®
• Graco SnugRide 32
®
• Graco SnugRide 35
®
WARNING
1
2
D. Lower the Graco infant car seat into the infant car
seat adapter. The Graco infant car seat should latch
onto adapter shown in the detail view.
Note: Pull up on the Graco infant car seat to
ensure it is attached.
E. Route buckle webbing through the belt path on
both sides of the infant car seat . Attach the
buckle . Tighten strap so that the infant car
seat is held tightly.
1
2
3
13
.
To attach the Graco infant car seat:
A. Remove toddler seat by lifting up on the seat
by pressing down on the release latches
.
C. Lower the infant car seat adapter onto the hinges
until it clicks.
Note: Pull up on the infant car seat adapter to
ensure it is attached.
B. Locate the infant car seat adapter and rotate
arms until they lock into place.
Note: To fold up infant car seat adapter, push release
button and rotate arm up.
Repeat for other side.
1
2
1
2
3
1
2
1
2
1
2
To remove infant car seat adapter
Press release tab and pull up adapter .
2
1