JINOU BLE5.0 Series, User Manual

Page: 11 / 26

7
1. Testing Command
Command Answer Parameter
AT < CR >< LF > < CR >< LF > OK < CR >< LF >
None
2. Parameter Setting Mode Indicate
Command Answer Parameter
None
< CR >< LF > +OPEN:< status > < CR
>< LF >
Status: Remote address status
0: no remote address is
configured
1: Remote address configured
If the adapt is a master device
and configure a remote
address, once powered on,
the adapter will connect the
slave device of
the address.
3. Inquire/Set Device Name
Command Answer Parameter
AT+NAME =< name >< CR >< LF
>
< CR >< LF > OK < CR >< LF >
name : Device name
Default:
BLE0405C1P
AT+NAME ?< CR >< LF > < CR >< LF > OK < CR >< LF >
< CR >< LF >+ NAME :< name >< CR >< LF
>
4. Inquire Local Bluetooth Address
Command Answer Parameter
AT+LADDR? < CR >< LF > < CR >< LF > OK < CR >< LF >
< CR >< LF > +LADDR: <bdaddr>< CR >< L
F >
bdaddr: Device
address
5.
Inquire/Set Remote Bluetooth Address
Command Answer Parameter