Mifare & ISO14443A&ISO14443B&ISO7816
http://www.jinmuyu.com
Copyright © 2003-2014 Jinmuyu Electronics Co., LTD. All rights reserved.
10/19
5.5
Card data output configuration
5.5.1
Start data configuration
Click “Mifare S50/S70” tab to set the card data output configuration. Two modes (Mode1, Mode2) can
be select. Select the key assignment in “Every Block End” and “Data End”, as following:
5.5.2
Continuous mode
Name the start byte of the start block, then output, till to the end byte of the named end block, as the chart:
If set the following parameters:
