Jinko JK3000-16, Operation Manual

Page: 14 / 25

12
Contact load capacity is DC 24V/1A
Channel setting
：
1
、
Select the required setup items, press the "parameter settings" key, and use the "up
and down" key to set the value or function.For example, setting the number of channels: after
moving the cursor to the number of channels, press the key of "parameter", change the
parameters with "up and down" key, then press the "set to finish" button.
2
、
Type setting of thermocouple: move cursor to the type of thermocouple, select
thermocouple type with "up and down" key, and press "set up" to exit.
3
、
The other projects are like this,
When the settings are completed, press "MENU" to save the settings and exit; press
the exit key, do not save the settings and exit.
Equipment parameter page introduction:
Channel number: number of test instruments
Baud rate: communication rate between instrument and host computer
Device address: the host computer inquires the address of the machine
Sampling time: speed of reading temperature and data
Unit of temperature: a unit of temperature:
（℉，℃）
Automatic screen change: when the number of passages exceeds 32, the temperature needs
multi page display.
Multi page automatic rotation display at ON