8/17
3)Basic Operation
3.1<MEAS DISP>
Touch the screen or press down [MEAS], the <MEAS DISP> page will be displayed in
the screen
shown as figure 3
‐
1.
figure 3
‐
1.
The following measurement parameters can be set on this page.
*Measurement function (FUNC R
‐
T)
*Resistance range (RANGE AUTO)
*Measurement speed (FAST SLOW2)
*File manage (FILE)
*Other tools (TOOLS)
*Soft keys (used to enter into operation pages)
The test results / condition display area on this page shows the following test
condition information. These conditions can be set in the tool settings page of the <
measurement Settings > page or the tool function page of < measurement display > page
is set up.
3.1.1 Measurement Functions
Measurable parameters on JK2516B are as follows:
R (Resistance)
LPR (Resistance tested at low voltage)
Note: All functions can be set and modified by: setting and modifying the function by using
the arrow keys and the O button.
Measurement function setting steps:
Use the up and down buttons to select the parameter area, then the right side of the
screen will display.
as the picture shows:
