background image

MMAINTENANCE  AND INSTRUCTION MANUAL - 3

English

TABLE OF CONTENTS

1.

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

03

2.

MAIN COMPONENTS

.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

04

3.

INTRODUCTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

05

4

GENERAL DESCRIPTION

.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

05

4.1. Operation.

5.

SYSTEM SETUP

.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

06

5.1. Installation recommendations.
5.2. Power supply connection.
5.3. Starting up.

6.

INDICATIONS FOR END USERS

.  . . . . . . . . . . . . . . . . . . . . .

08

7.

MAINTENANCE OPERATIONS

.  . . . . . . . . . . . . . . . . . . . . . . . .

09

7.1. Cleaning.
7.2. Troubleshooting guide.
7.3. Motor disassembly and extraction.
7.4. Replacement/cleaning of non-return valve.

8.

TECHNICAL SPECIFICATIONS

.  . . . . . . . . . . . . . . . . . . . . . . . .

12

9.

LAYOUT AND SECONDARY VENTILATION 
SYSTEM DIAGRAM

.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

10. EXPLODED VIEWS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

10.1. Lifting station assembly.
10.2. Caset assembly.

11. BASIC INFORMATION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

12. EC DECLARATION OF CONFORMITY

. . . . . . . . . . . . . . .

16

.

1. SAFETY INSTRUCTIONS

In order to reduce the risk of
electric shock, do not open the
top covers. Do not handle the
interior of the macerator; always
refer servicing to qualified
personnel.

In order to reduce the risk of fire
or electric shock, do not expose
this appliance to rain or flooding. 

DETAILED SAFETY INSTRUCTIONS.

Please read all the safety and operating
instructions before using the appliance. Keep
them for future reference.

All the user safety indications, instructions and
operations included in this manual must be
observed.

LIFTING STATION 

EB-705

MMAINTENANCE 
AND INSTRUCTION
MANUAL

1

en

English

Summary of Contents for CICLON LS EB-705















Reviews: