Jimmy JV63, Instruction Manual

Page: 50 / 55

49
Trouble Shooting
Please check the following issues before sending to designated repair offices.
Symptoms Possible Causes Solutions
Machine not working
Battery has no power Charge the vacuum cleaner
Metal tube, electric floor
had, is not assembled
correctly to the vacuum
cleaner
Check the accessories are
assembled correctly to the
vacuum cleaner
Machine stops working
during use
Main motor temperature
overheat and activates
temperature protection
machine for 5 to 10 minutes
Check whether cyclone
systems needs cleaning
Brushroll stops running
during use
Floorhead
overloaded(Such as
working on carpet, too
much hair entangled
around brushroll)
machine for 5 to 10 minutes
whether brushroll needs
cleaning
Machine drops from
strong to normal mode
automatically Cyclone system is blocked
and activates main motor
over speed protection
Clean dust cup and cyclone
system
Suction drops
Dust cup full Clean dust cup and cyclone
Filter blocked Clean or replace filter
Floorhead air path blocked Clean floorhead air path
Charging indicators red
and green light flickers
alternately during charging
contact to machine or
power socket Replug charger to machine
and power socket
Short working time after
charging
Machine not fully charged
Follow instruction manual to
fully charge the battery
Battery old aging Replace battery
Attention:If any other failures occurred, which need professional tools, in order to avoid danger, the machine
must be repaired or replaced by manufacturer, other maintenance offices or professionals from similar offices.