Jimmy JV53, Instruction Manual

Page: 27 / 36

26
Main Body
Metal Tube
Electric Floor
Head
2-in-1
Upholstery Tool
2-in-1
Upholstery Tool
2-in-1 Crevice
Tool
Charging Base
Handheld
Vacuum
Conductive
Needle
（√）
Clean Wall
（
×
）
Wet Wall
Assemble the electric head floor,
metal tube and handheld vacuum
cleaner
First, assemble the floor head and conductive
metal tube based on the assembling method of
electric floor head and conductive metal tube.
Secondly, align the conductive needle of the
conductive metal tube with the suction mouth
conductive pipe, push upwards until a “click”
sound is heard.(Picture4)
Accessories Assembly
For ease of use, this product is specially
equipped with accessories for the hand-held
vacuum cleaner. The handheld can connect to
different tools for different cleaning purpose.
Connect handheld vacuum cleaner
with 2-in-1 upholstery tool
Insert 2-in-1 upholstery tool connector into
the handheld air inlet until it is tightly fitted.
(Picture5)
Attention:The handheld vacuum cleaner can also connect
the accessories such as: 2-in-1 crevice tool, soft brush
and electric mattress head, the connecting method is the
same as 2-in-1 upholstery tool.
Connecting accessories with charging
base
Please fix the charging base on a clean wall, do
not fix on the wet wall like in the kitchen. After
the task has been competed, place them on the
charging base.(Picture6&7)