JIMCO MAC500s, User Manual, Page: 6 / 14

6
Installation instruction
Wall mount your MAC500s
1. Find a suitable place for your MAC500s
Note: We recommends to place the MAC500s at least 200 mm. away from any side obstacles on both sides of
the MAC500s to ensure inlet and outlet air. It must be vertical installed.
2. Place the DIN rail on the wall and level it
3. Mark the holes with the pencil (On each side of the rail)
4. Drill the holes and insert the anchors (if needed)
5. Mount the DIN rail with suitable screws/anchors/plugs for the surface.
6. Mount the DIN rail brackets on the back side of the MAC500s with the screws/anchors/plugs.
Note 1: The harder you tighten the screws the harder will MAC500s be mounted on the DIN rail.
Note 2: You can choose individually on which side you want the outlet air from the MAC500s, outlet air is on the
same side as the operation buttons
Note: 3 By turning the DIN rail brackets 180 O (degree) you choose individually on which side you want the outlet
air.
Note 4: Hooks on the DIN rail brackets shall always be placed at the top according to the choice of the outlet air.
7. Mount MAC500s on the mounted DIN rail on the wall. Make sure to attach the hooks on the DIN rail
brackets first to the DIN rail and then push the MAC500s towards the wall
Note 5: Make sure that you hear “click”
See drawings on page 6-11