14
General Maintenance
1. Depending on the parts usage, keep some spare available, all parts
suggest must consult local agent for factory authorized parts when
servicing system.
2. Clean your boat after a trip to prevent damage from sand, salt water or
such exposure.
3. No lubrication or regular mechanical maintenance is needed.
4. Wash outside of the boat with a mild detergent and water, or use the
sponge and mild soap. It can clean most dirt.
5. Do not use solvents to clean the boat, solvents may damage material or
plastic components in system.
6. Make sure the boat is completely clean and dry before storing,
otherwise mold can accumulate or boat will be mouldy.
7. Store all boat’s accessories in a dry storage location and with ventilation.
Make sure all parts are dry before storage.
8. You can store the boat in a dry location and take advantage of
the original
packing carton for storage for next season use. Do not store in an area
where it is likely to be exposed to extreme temperature.
Disassembly
1. Remove all the accessories (fishing rod, oars, gear pouch...) from the
boat.
2. Open all valves and deflate boat completely.
3. Fold the boat. (Make sure the boat is clean and dry. See the above
General Maintenance chapter.)
4. Put boat and air pump, oars into carry bag for storage.
