background image

CAUTION  AND RECOMMENDATIONS FOR USE IN THE CAR

Please read all instructions before use and keep them for future

reference.Complies with safety standards.

Can only be installed in designated vehicles equipped with three-point

safety belts that comply with EEC nº16 or equivalent standards.

Never use a child safety seat:

- that is not adapted to the child's weight and size

- for any other use than manufacturer's recommendation (follow

manufacturer's instructions for installation)

- that has been in an accident:  seat must be replaced because it

might have hidden damage

Always attach your child in a safety seat, even for short trips.

W

arning!  Never leave your child unattended.  During trips, be sure that

your child remains safely secured.

Belts must remain taut, never twisted.Always use and adjust the 

Y-belt.

Make sure that baggage and other objects are correctly stored to avoid

harm in case of accident or sudden braking.

It is recommended to use the seat with its seat cover and to replace it

manufacturer recommended cover only

.

The seat should be installed in such a way that no parts (rigid and plastic)

can be caught in the vehicle's door or under a seat during normal vehicle

use.

The seat's safety can only be guaranteed if installed and used according

to manufacturer's instructions:  any changes in use, installation or

accessories will jeopardize the seat's safety.

The booster seat is designed for children weighing 0 to 13 kg in all

vehicles with 3-point belts conform to current European standards. It must

be installed facing backwards.

EXTREMELY

 DANGEROUS. Never use on a passenger seat fitted with

airbags.

USING WITH THE PUSHCHAIR

USINGAS CRADLE

The seat must be securely attached to the pushchair for maximum

protection.

: KEEP FOR FUTURE REFERENCE

Never leave the child unattented

Do not use the seat once the child can sit unaided.

This seat is not intended for prolonged periods of sleeping.

Its is dangerous to use this seat on an elevated surface, e.g.a table.

Always use the restrain system (harness).

This seat does not replace a cot or a bed.Should your child need to

sleep, then it should be placed in a suitable cot or bed.

Do not use the seat if any components are broken or missing.

Do not use accessories or replacement parts other than those approved

by the manufacturer.

Always use the Y-belt.

IMPORTANT !

Warning›

3

Summary of Contents for Rixa










Reviews: