Confidential & proprietary. Copyright 2022 Jigabot LLC, all rights reserved. [email protected] www.Jigabot.com Ph. 801-995-368 7
Quick-Start Guide
Assembly & Setup
Jigabot EX Twofer
Setup Step 2
When the EX Bot Twofer is elevated relative to the subject, it will frame the subject by
tilting down to aim at it. (That is, the Upper EX Bot will tilt down). The camera should be
balanced (see step 3 on right) so that when tilted down, and powered OFF, it will hold its
position until powered on again.
Setup Step 3
In order to balance the camera load on the upper EX Bot, power OFF the
EX Bot Twofer, then slide camera forward or backwards until it holds its tilt
position.
