Jifon AquaHeat 13 User Manual Download Page 5

5

AH-01

Always follow the safety instructions in this manual as well as on signs and markings on and 
around the machine in order to prevent damage to person and machinery.

Th

  e heat pump may only be used in accordance with the instructions in this manual. All other 

use is forbidden. Incorrect use caused by not following the instructions in this manual may 
result in damage to property, and at worst in personal injury.

If problems arise with the AquaHeat

TM

 heat pump, refer to the Troubleshooting chapter before 

you contact Jifon. If you need a service engineer, only contact authorized service engineers. All 
adjustments, other than room temperature are strictly forbidden.

All maintenance work must only be carried out by authorized personnel.

Th

  is document should be kept for the lifetime of the heat pump.

Th

  e following symbols occur in the manual to help you when you read the directions.

Safety directions.

 Th

  is symbol is used 

when a dangerous situation may arise.

Advice. 

Th

  is symbol is used when we 

want you to pay attention to something 
important.

Safety Instructions

Manual Symbols

Introduction

Make sure that the
current is disconnected
before any maintenance
work is started.

WARNING!

It is important that all 
radiators are completely 
open in order for the heat 
pump to work optimally.

NOTE!

Summary of Contents for AquaHeat 13





































Reviews: