4. Installation instructions
*IMPORTANT: Please prepare a USB wired/wireless mouse for your first boot.
1. Turn on TV or Monitor, then turn video output mode to HDMI.
2. Connect TV or Monitor to Remix Mini with an HDMI cable.
3. Connect the Power adaptor to turn onRemix Mini.
*NOTE: During your first boot, plugging in your Remix Mini will start the device
automatically.
4. The screen will load and then show the home user interface of Remix OS.
5. Connect the USB wired/wireless mouse to finish initial setup of your Remix Mini.
5. Troubleshooting
Most problems with your Remix Mini can be solved rather easily following the suggestions
listed below. For additional tips and troubleshooting information, please write to us at
First steps
If your Remix Mini isn’t responding, please make sure:
The cables between your Remix Mini and your screen/monitor are pushed all the
way in.
The power cords for your Remix Mini and your screen/monitor are securely
connected to a working power source.
Your screen/monitor is turned on and set to the correct input.
Your Remix Mini is connected to your network. Go to Settings > About > Status > IP
address to make sure your Remix Mini has an IP address.
Your network and Internet connections are on and working properly.
If you’re still having trouble, try resetting your Remix Mini by pressing the top of your Mini
and holding for at least 10 seconds. If that doesn’t work, try turning off your screen/monitor,
turn off your Remix Mini, reset your wireless networking equipment and modem. Wait 30
seconds and then reconnect everything.
5. Operating system
At the core of your Remix Mini is our custom engineered version of Android Lollipop - Remix
HDMI Cable
(In Package)-
connects Remix Mini to your screen/monitor.
You may need to source a converter if your monitor only supports
VGA/DVI/DisplayPort .etc.
Power Adapter
(In
package)100-240v/50-60Hz
Keyboard/Mouse
(USB and BT/WiFi keyboard and
mouse)
