How to position the focus
Step 24
The engraved object is placed under the
laser module
The bottom of the measuring tool is in
contact with the surface of the engraving
object
Turn the knob on the bottom of the laser
module to control the rise or fall of the laser
module (as shown)
When the scale of the measuring tool is
aligned with the reference line, this is the
focus position.
When engraving, the scale "0" line is aligned
with the "reference line"
When cutting 4mm objects, the scale “4" is
aligned with the "reference line"
Engraved objects
Baseline
Engrave
Measuring tools
Cut 2mm Thickness
Cut 4mm Thickness
Cut 6mm Thickness
Knob
32
PT.2 set up LE-1
