—
3
—
Begin to use travelling recorder
Battery Charging
There are two methods for battery charging:
1 Using USB line to connect the machine with the computer for
charging;
2 Using accessory vehicle-mounted power source for charging.
In the whole process of charging, charging indicator lights up in red.
When the charging is finished, indicator automatically extinguishes.
The whole charging process takes about 240 minutes.
Insert a memory card
Insert TF (Micro SD) memory card straightly into the slot in
accordance with the indicating direction on the machine body until
hear a “Ka" sound.
Remove card: Push the TF card inside and the card will pop up. Then
you can remove.
Notice:
When using the memory card for the machine for the first time, since
the format of the memory card is not compatible with the machine,
you must use the machine or attached tool software ( ) to
format the memory card (The formatting of the memory card by
computer is not supported). Formatting will permanently delete all the
data on the memory card, including the protected image, which can
not be restored. Therefore, before formatting the memory card, please
back up important data.
If you can't use the machine to format the memory card format, please
use attached software ( ) on a computer.
Summary of Contents for JW-X3000
Page 3: ...1 Product Structure...
Page 4: ...2...
