7
(4) Water boiled dry state.
When the water boils up, the product will make
a dripping sound, and the time will show.
Show: E00, after adding water to cool, it will
return to the initial standby state.
THE TIME DISPLAY IS: 0:00.
(5) Adjust the power.
The default power is 600W, display: 600, press the "power" key to adjust the power level, and
press the "power" key for the first time to display
Show the current power, and then add 100 to the first power, indicating an increase of 100W.
When it is increased to 600, then press the rule to return to
100, hold and hold, select continuously cycles, and then return to the display when the power
is selected.
During the operation or insulation of the "soup" function, press the "power" button and press
the display for the first time: 600, indicating 600W work.
Rate, click to display 100 again to indicate 100 power.
(6) Circuit memory function
After the pot body leaves during work, the circuit has a memory function. Put the pot body
back within 10 minutes and you can press it.
The previously set state continues to work.
After the pot body leaves during the work, it
shows as: "000"
Put the pot body back to restore the previous
function and display.