JHCTech SIGM-3250 Series User Manual Download Page 49 | Manualshive

Page: 49 / 71

JHCTech SIGM-3250 Series User Manual Download Page 49

User’s Manual

44

CSM Support

Compatibility Support Module, which is a compatibility module, is a special module of UEFI and provides

compatibility support for system that do not support UEFI.

GateA20 Active

This item indicates whether to disable GA20 through the BIOS server or keep the activation status all the

time.

Option ROM Messages

This item shows the display mode of option ROM Message.

Boot option filter

This item indicates the boot priority of controlling EFI or Legacy option ROM.

Network

This item is used to set the EFI network card Option ROM boot or the traditional network card Option

ROM boot or priority boot.

Storage

This item is used to set the EFI storage Option ROM boot or the traditional storage Option ROM boot.

Video

This item is used to set EFI display Option ROM startup or traditional display Option ROM startup.

Other PCI devices

This item is used to set the EFI PCI device Option ROM boot or the traditional PCI device Option ROM

boot.

▶

USB Configuration

USB configuration, enter this sub-menu, there will be USB-related detailed settings.

«
...
47
48
49
50
51
...
»

Summary of Contents for SIGM-3250 Series








































































Reviews:

No comments