JHCTech PMI-3110, User Manual

Page: 21 / 39

User’s Manual
14
b) Fix the hard disk drive on the mounting bracket with 4 cross round screws(M3
×
4mm) ,insert 4
shockproof rubber rings into the mounting bracket hole , and paste one hard disk heat conduction paste on the
hard disk drive as below:
Figure 2.17 Figure 2.18
c) Fix the ready mounting bracket on the bottom cover with 4 cross pan head srews (M3
× 5mm),and then
insert the hard disk drive cable into hard disk drive as shown in figure.
Figure 2.19 Figure 2.20
2.5.2 Memory chip Installation
Insert a memory chip at a 30 degree angle into the main board memory slot, as shown in Figure.
Thick:1.5mm