JHCTech KMDA-3201, User Manual, Page: 75 / 76

User’s Manual
68
4 * creation date
：
5*=======================================================================*/
/*==========================================================================
1 * void Second_gpio_mode(int port, int mode);
2 * function description: Subcard input and output mode settings
3 * parameter description:
Parameter: port fill in subcard GPIO number, 1 or 2
Mode 8 bit of a bit, each bit controls the input and output mode of a GPIO pin,
Bit =1, the corresponding pin is used as the input port.
Bit =0, the corresponding pin is used as an output port.
Note: The output value is valid only when the pin is in output mode.
4 * creation date
：
5*========================================================================*/
/*==========================================================================
2
* void Second_gpio_output(int port, int level);
2 * function description
：
high and low levels output of the subcard
3 * parameter description:
Parameter: port fill in subcard GPIO number, 1 or 2
Level 8 bit of a Byte, each bit controls a GPIO pin output value,
Bit =1, means output high level
Bit =0, means output low level
Mode Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
GPIO pin PIN8 PIN7 PIN6 PIN5 PIN4 PIN3 PIN2 PIN1
Level Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0