User’s Manual
19
2.4.6 COM3/4 Connector
COM3/4 are all 2*5 10-pin connectors, external serial port, standard RS232.
The pin functions of COM
port 3/4 will vary according to JP1’s and JP2’s setting. JP1 and JP2 allows you to configure the Serial
COM port 3/4 to RS232. Refer to “COM3/COM4 RS232/Power Select” in this chapter for more
information.
Figure 2.20 COM3/4Connector
Table 2.6: COM3/4 Serial Port Pin Assignments
Pin
Signal Name
Pin
Signal Name
1
DCD
6
DSR
2
RxD
7
RTS
3
TxD
8
CTS
4
DTR
9
RI /+5V/+12V
5
GND
10
NC
2.4.7 SATA0 (Serial ATA) Connector
There are Serial ATA 3.0 ports with data transfer rate up to 6Gb/s (SATA 0). The Serial ATA connectors
are used to connect Serial ATA devices. Connect one end of the Serial ATA data cable to a SATA
connector and insert the other on-board docking parallelly into another Serial ATA device.
Figure 2.21 SATA0 Connector
Table 2.7: SATA Pin Assignments
Pin
Signal Name
Pin
Signal Name
1
GND
5
RXN
2
TXP
6
RXP
Summary of Contents for ALAD-K1520T
