JHCTech ALAD-151T, User Manual

Page: 14 / 22

User’s Manual
8
Rear view:
Figure 2.3
2.1.1 Power Input Connector (DC-IN)
This 3-pin 3.81mm connector provides maximum of 60W power and is considered a low power solution.
Connect a DC power cord to this connector . Use a power adapter within 9 ~36V DC output voltage. Using
a voltage out of the range 9 ~36V may fail to boot the system or cause damage to the system board.
Figure 2.4 3-pin 3.81 Connector
Table 2.2: Power Connector Pin Assignments
Pin Signal Name
1 +9~36V
2 NC
3 GND