SX1 User Manual
5
M-SX1-001-01
Important Safety Information
Laser Hazards
Warning
•
Never look directly into the end of an optical cable connected to an optical
output device that is operating. Laser radiation is invisible and direct
exposure can severely injure the human eye.
Electrical Hazards
Warning
•
Some of the circuits are powered whenever the unit is connected to the AC
power source (line power). To ensure that all circuits are powered off,
disconnect the power cord from either the power inlet on the unit’s rear
panel or from the AC line-power source (receptacle). The power cord must
always be accessible from one of these points. If the unit is installed in a
cabinet, the operator must be able to disconnect the unit from the line power
by the system’s line
-power switch.
•
Use only the type of power cord supplied with the unit. If you need to replace
a lost or damaged cord, make sure to replace with a power cord of the same
type.
•
Connect the power cord only to a power outlet equipped with a protective
earth contact. Never connect to an extension cord or any receptacle that is
not equipped with this feature.
•
If using a voltage-reducing autotransformer to power the unit, ensure that
the common terminal connects to the earthed pole of the power source.
•
Do not interrupt the protective earth grounding. Such action can lead to a
potential shock hazard that can result in serious personal injury. Do not
operate the unit if an interruption to the protective grounding is suspected.
•
Do not operate the unit when its cover or panels have been removed.
•
To prevent potential fire or shock hazard, do not expose the unit to any source
of excessive moisture.
•
Do not use the unit outdoor.
•
Operating the unit in the presence of flammable gases or fumes is extremely
hazardous.
