OA1 User Manual
13
M-OA1-001-01
Device Information and Settings
Swipe left to access the Setup page (Figure 9). This page will display information about the unit, its
connectivity status and settings.
Figure 9: OA1
Setup
page
Table 4: Detailed description of the OA1 Setup page (Figure 9)
Parameter
Description
Network Status:
•
If connected to a network via Ethernet, it will show as
Connected.
•
If not connected to a network, it will show as
Disconnected.
Device Name:
•
Displays the PN of the unit.
IP:
•
If connected to a network via Ethernet, it will show the IP address of the
unit. Use this IP address to access the OA1 webpage or connect to it via
software.
•
If not connected to a network, it will show as
N/A
.
XN1 Location:
•
Shows the IP address and port of the last connected XN1 server.
•
If it hasn’t been connected, it will show as
N/A
.
Power Levelling:
•
If enabled, the OA1 will vary the attenuator to match and maintain the
attenuation set in dBm mode.
