SETTING THE CLOCK / TIMER
LISTENING TO THE RADIO
ANTENNA
CD PLAYING
BASIC OPERATION
Connect the AC power cord to a wall outlet.
1. 12:00 will show on the display and begin to flash
2. Press /HOUR button to set the hour and then press MINUTE /
button to set the minute
3. Press the CLOCK/ADJ button to confirm the time, the display will stop flashing.
4. You can switch the clock display between 12H and 24H by holding the CLOCK/ADJ button for 2
seconds.
5. During OFF MODE, you can Press the CLOCK/ADJ button and then repeat step 2 and 3 to change the
time as well. Remarks: The clock does not keep time during a power failure
1. Slide the BUZZER/CD/RADIO/LINE IN switch into CD/RADIO/LINE IN position
2. Slide the function (CD/AM/FM/LINE IN) switch into AM or FM position
3. Press the ON/OFF button into ON status, the ON/OFF indicator will light up
4. Tune into a station using the TUNING control
5. Adjust the VOLUME control to the desired level.
FM: Extend the FM aerial wire to improve FM reception.
AM: Turn the unit for better AM reception.
1. Open the disc compartment
2. Place a disc in the centre with the label side facing up and close the Disc compartment
3. Slide the function (CD/AM/FM/LINE IN) switch into CD position, then press the ON/OFF button into ON
status
4. The total number of tracks will show on the display for 2 seconds and then the display will turn back to
clock display
5. Press
button to start playing the disc
Note:you can press CD DISPLAY button to show the current track number that is playing current or the total
number of tracks during STOP position in CD mode
To stop Playback
Press STOP button
To pause Playback
Press button, To resume playback, press it again
To search for the beginning of a track
Press or
button briefly
To locate a desired passage
Keep or
pressed. Release the button at the
start of the desired passage
Turm on your desired radio station or playing a CD as previosly instructet.
1. Press the SLEEP button and the SLEEP indicator will light up on the clock display.
2. Repeatedly press the SLEEP button for the desired sleep time 90,60,30,15 minute, the sleep indicator will
light to indiacte the sleep mode is activated
3. TO cancel sleep time,press the SLEEP button again until the SLEEP indicator goes off.
TO ACTIVATE THE SLEEP FUNCTION
OPERATION
12
ENGLISH
