JGC RRMP-3400, User Manual

Page: 22 / 28

TAPE DECK
GENERAL OPERATION (Keys from left to right)
RECORD
Press together with
PLAY
button to start tape recording.
PLAY
Press to start playing tape.
FAST FORWARD
Press to start the tape winding in a forward direction.
FAST REWIND
Press to start the tape winding in a reverse direction.
STOP/EJECT
Press to stop all cassette play operation. Press again to open the cassette door.
PAUSE
Press to interrupt recording or playback.
PLAYBACK
1. Slide the
FUNCTION
switch to TAPE.
2. Insert a pre-recorded cassette tape.
3. Press
PLAY
button to start playback.
4. Adjust the volume control to the desired listening level.
5. Press
PAUSE
button when you want to stop playback temporarily.
6. Press
STOP/EJECT
button to terminate the playing.
RECORDING
RECORDING FROM RADIO
1. Slide
the
FUNCTION
switch to RADIO.
2. Tune to the desired station and insert a blank cassette tape.
3. Press
RECORD
and
PLAY
button to start recording.
4. Press
PAUSE
button to interrupt the recording or the
STOP/EJECT
button when finished recording.
RECORDING FROM CD
1. Slide
the
FUNCTION
switch to CD.
2. Insert a blank cassette tape for recording.
3. Press
PAUSE
and
RECORD
buttons together. The recording function is now on stand-by mode.
4. Activate the CD player, and then press the
PAUSE
button to start recording.
5. To stop recording, press the
PAUSE
button first and then press the
STOP
button on the CD player.
NOTE: Pressing
RECORD
and
PLAY
together will automatically resume a paused CD playback
GENERAL INFORMATION ON RECORDING
•
Recording is permissable in so far as copyright or other rights of
third parties are not infringed.
•
This deck is not suitable for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes. For recording, use NORMAL (IEC I)
type cassettes on which the tabs have not been broken. The best
recording level is set automatically. Altering the VOLUME will not
affect the recording in progress.
•
At the very beginning and end of the tape, no recording will take
place during the 7 seconds, when the leader tape passes the
recorder heads.
•
To protect a tape from accidental erasure, have the tape in front of you and break out the left tab. Recording on this
side is no longer possible. To record over this side again, cover the tab hole with a piece of adhesive tape.
•
Use the BEAT CUT switch at the back of the main unit to suppress beat pulses while recording and receiving AM
radio. the beat pulses may influence the recording level.
22
TAPE DECK
ENGLISH