BASIC OPERATION & RADIO
22
ENGLISH
MANUAL TUNING
1. Press TUNER/BAND
button to select desired BAND (AM or FM).
2. Tune to the required station by pressing the CD/TUNING
button.
3. Adujst volume control to the desired volume level.
AUTO TUNING
1. Press TUNER/BAND button to select desired band (AM or FM).
2. Press and hold the
CD/TUNING
button for 1 - 2 seconds and then release.
3. The unit will start scanning automatically and stops when a radio station is reached.
4. Repeat steps 3 & 4 until a desired radio station is reached.
5. Adjust volume control to a desired volume level.
PRESET STATIONS BY REMOTE HANDSET
You can store up to a total of 30 radio stations in the memory (20-FM / 10-AM).
1. Set to TUNER mode.
2. Turn to the desired radio station by "MANUAL" or "AUTO" tuning methods.
3. Press MEM/CLOCK button to enable programming state.
4. Press M-UP or M-DOWN button to select the desired station memory for storage.
5. Press MEM/CLOCK button again to confirm the setting.
6. Repeat steps 2 to 5 to store other stations.
7. To return to normal tuner mode, leave the keys alone.
8. Press M-UP or M-DOWN button to reload the preset stations in order.
HINTS FOR BEST RECEPTION:
AM: The receiver has a built-in AM ferrite antenna. If the AM reception is weak, rotate or reposition the
unit. This usually improves the AM reception.
FM: Attached FM wire antenna plugged in at the rear of the unit should be fully unwound and extended
its full length for best reception.
LISTENING TO THE RADIO
POWER AND SOURCE SELECT
POWER
Press Standby /on button and the stand-
by LED will light off when unit is on.
VOLUME
Adjusts loudness of speakers or
headphones
FUNCTION
Use to select desired source (TAPE, CD,
RADIO ) to be listened to. The selected
source is also available for recording.
Please consult RECORDING section of
this manual for more details.
