BASIC OPERATION
15
H
SI
L
G
NE
SSwwiittcchhiinngg oonn//ooffff:: SSaavvee eenneerrggyy
Whether you are using mains or battery supply,
to avoid unnecessary energy consumption
always adjust the
FFUUNNCCTTIIOONN
selector to
OFF
.
1. To select your sound source, adjust the
FFUUNNCCTTIIOONN
selector to
CD/MP3
,
TAPE(OFF)
or
RADIO
.
2. Adjust the sound with
VVOOLLUUM
MEE..
3. To switch off the power, set the
FFUUNNCCTTIIOONN
selector to
TAPE(OFF)
position.
RRaaddiioo rreecceeppttiioonn
1. Slide the function selector to
RADIO
.
2. Slide the BBAANNDD selector to a desired setting
(FM ST., FM or AM)
3. Rotate the TTUUNNIINNGG control to find the desired
stations.
4. If the BAND selector is set to FM ST. and a
station with stereo broadcast is received, the
FM ST. indicator will light up.
When you have finished listening, slide the
FFUUNNCCTTIIOONN selector to the
OFF
position.
−
If FM reception is weak, stereo may be indi-
cated but the sound may not be good. In this
case, set the
BBAANNDD
selector to
FM
to receive
in
mono
only.
−
For FM, pull out the telescopic antenna.
Incline and turn the antenna. Reduce its
length if the signal is too strong (very close
to a transmitter).
−
For AM the set is provided with a built-in
antenna so the telescopic antenna is not
needed. Direct the antenna by turning the set
itself.
PLAYING A CASSETTE
1. Select
TAPE
source.
2. Press
STOP/EJECT
to open the cassette door.
3. Insert a cassette and close the cassette door.
4. Press
PLAY
to start playback.
5. To interrupt playback, press
PAUSE
. To resume, press
PAUSE
again.
6. by pressing
FF
or
REW
on the set, fast winding of the tape is possible in both directions.
7. To stop the tape, press
STOP/EJECT.
The keys are automatically released at the end of the tape, except if
PAUSE
has been
activated.
H
SI
L
G
NE
1. S
el
the fucntion s
elector
to CD
/
MP3
.
2.
Press and hold the PLAY/PAUSE/USB button to select CARD or USB mode (indicated in the LC dis-play).
3.
Insert a SD/MMC card into the card slot or insert a USB memory stick into the USB port.
4. Display will show total track number
5. Press
PPLLAAYY//PPAAUUSSEE
to start music playing
6. Press or to select tracks
7. Repeat function can be selected identical to CD/MP3 playback
8. Press
SSTTOOPP
to end playback
Note : Due to fast changing IT technology, this unit may not be compatible with some USB or SD/MMC
flash storage device.
* USB support Specification : USB V1.1/V2.0
USB / SD-MMC FLASH MEMORY PLAYBACK
