ENGLISH
34
CD-PLAYER
Track search, fast forward and rewind
• Press
(32) to go to the beginning of the next track.
• Press
(37) to go back to the beginning of the track which is playing. Press twice to go back to the
beginning of the previous track.
• If you press this button for a longer time, the speed will increase. As soon as you let go of the button, the
playback returns to normal speed.
Skip function
• Press the
SKIP+10/FOLDER/MEM.SET
button (33) to skip 10 tracks.
• This function is particularly useful when playing a MP3-CD that normally contains a large amount of tracks.
• Use this button to skip tracks and get near the desired track. Then select the track with
(37) or
(32).
Repeat function
• You can set this function during playback of a track.
• Press the
REPEAT/PROG/MEMORY
button (36) once in order to repeat the track being played.
will be
shown on the display. The symbol flashes.
• Press the
REPEAT/PROG/MEMORY
button twice to replay the entire CD.
will be shown on the display.
The symbol does not flash.
• Press the
REPEAT/PROG/MEMORY
button three times to switch off the function.
Program track playback
• You can program the CD player to play a desired sequence of up to 60 tracks. Press the /
STOP/
FM. MODE
button (31) before beginning programming.
• Press the
REPEAT/PROG/MEMORY
button (36) to switch to programming mode.
PROG
and the program
place number
P--01
will be shown on the display. The track number digits
00
flash.
• Select a track with
(37) or
(32) and confirm your selection with the
REPEAT/PROG/MEMORY
button.
• The next program place number will be shown on the display. Proceed as above to program other tracks.
• Press the
/
BAND
button
(38) in order to begin the playback of the programmed tracks.
PROG
will be
shown on the display.
• Press the /
STOP/FM. MODE
button (31) to end the program playback. Start the program again by
pressing the
/
BAND
button (38).
• To erase this program, press the /
STOP/FM. MODE
button (31) twice. The program will also be erased if
you open the CD door or set the
FUNCTION
switch (19) to another position.
Note:
• The repeat function can be combined with playing of a program. Read the
Repeat function
section.
JGC-RRMP-6910-IM-DE-EN-V2.indb 34
11/08/2009 1:13 PM
