Jeulin 452 146, Manual

Page: 7 / 11

ESAO
®
Method
CTM Conductimeter
Adaptator ESAO
®
4
Ref :
452 146
ENGLISH 5
1 General information
This adaptor helps carry out conductivity measurements with the ESAO4
system.
It is used with the CTM conductimeter probe
(part no. 701 329). It is
equipped with a manual temperature compensation function.
Connection to
the console
Calibration
button
Button for adjusting the
manual temperature
compensation
Rated capacity
controllled by the
software
Safety sockets
for connecting
the probe
2 USE
2.1 ESAO System
This adaptor works with ESAO 4, i.e.
•
An ESAO 4 interface card Part no.: 451 300 or 451 100
•
An ESAO 4 console. Part no.: 451 101
Or
•
An ESAO 4 Plus console Part no. : 451 401
2.2 Connecting the adaptor to the ESAO console
The adaptor is connected using the connector located at the back of the box:
•
Hold the box horizontally
•
Follow the guide slots of the ESAO console
•
Engage it fully.