JETWAY V400ADB User Manual Download | Manualshive

Page: 33 / 48

background image

30

SPP

: Standard Parallel Port

EPP

: Enhanced Parallel Port

ECP

: Extended Capability Port

SPP/EPP/ECP/ECP+EPP

To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To operate the
onboard parallel port in the EPP modes simultaneously, choose “EPP.” By choosing “ECP”, the
onboard parallel port will operate in ECP mode only.  Choosing “ECP+EPP” will allow the
onboard parallel port to support both the ECP and EPP modes simultaneously. The ECP mode
has to use the DMA channel, so choose the onboard parallel port with the ECP feature. After
selecting it, the following message will appear: “ECP Mode Use DMA” at this time, the user can
choose between DMA channels 3 to 1. The onboard parallel port is EPP Spec. compliant, so
after the user chooses the onboard parallel port with the EPP function, the following message will
be displayed on the screen: “EPP Mode Select.”  At this time either EPP 1.7 spec. or EPP 1.9
spec. can be chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software

Power Management Setup

Item Help

ACPI Function Enabled
Video Off Option Suspend -> off
Video off Method V/H SYNC+Blank
MODEM Use IRQ 3
Power Button Function Instant-Off
State After Power Failure Auto
> Wake Up Events Press Enter

Menu Level >

↑↓→←

Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

ACPI Function

This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.

Video Off Option

This determines the manner in which the monitor is blanked. The choice are Suspend

→

off, All

Modes

→

Off, and Always On.

Video Off Method

This determines the manner in which the monitor is blanked.

DPMS

(default)

Initial display power management signaling.

Blank Screen

This option only writes blanks to the video buffer.

V/H SYNC+Blank

This selection will cause the system to turn off the vertical and

horizontal synchronization ports and write blanks to the video buffer.

Modem Use IRQ

«
...
31
32
33
34
35
...
»

Summary of Contents for V400ADB

















































Reviews:

No comments

Related manuals for V400ADB

Brand: ECS Pages: 52

Brand: Intel Pages: 80

Brand: Gigabyte Pages: 100

Brand: Ublox Pages: 27

Brand: JETWAY Pages: 48

Linear DC2681A-A

Brand: Analog Devices Pages: 8

Brand: ECS Pages: 74

Brand: Supero Pages: 78

975X Platinum Series

Brand: MSI Pages: 157

Brand: DFI Pages: 48

Brand: Gigabyte Pages: 104

Brand: Nuvoton Pages: 11

Brand: MSI Pages: 115

Brand: TRU Components Pages: 4

Brand: Apex Digital Pages: 7

Brand: TYAN Pages: 67

Brand: TYAN Pages: 66

Brand: TYAN Pages: 81

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands