17
(5) Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your
computer without having to turn off your power switch. This is a preferred method
of rebooting in order to prolong the lift of the system’s power supply. See the figure
below.
(6)
Speaker connector: SPEAKER
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(7) Power
LED
: PWR LED
The Power LED is light on while the system power is on. Connect the Power LED
from the system case to this pin.
(8) Power
switch
: PW BN
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the
system.
System Case Connections
GN
D
Tu
rbo L
ED
GN
D
Res
et
SW
VCC
GN
D
Tu
rbo SW
Speaker
VC
C
NC
GN
D
Pow
er LED
NC
GN
D
VCC
IDELED
PW BN
(9) Wake On-LAN Headers
(3-pin) : WOL
This connector connects to a LAN card with a WAKE ON-LAN output. This
connector power up the system when a wake up signal is received through the LAN
card.
NOTE:
This feature requires that Wake On LAN or Ring In Wake up is enabled.
Wake-On-LAN Headers
WOL
1 3
5V
SB
GN
D
WO
L
