28
AGP Function Settings
This option determines the effective size of the graphics aperture used in the particular PAC
configuration. The AGP aperture is memory-mapped, while graphics data structure can
reside in a graphics aperture. The aperture range should be programmed as not cacheable
in the processor cache, accesses with the aperture range are forwarded to the main memory,
then PAC will translate the original issued address via a translation table that is maintained
on the main memory. The option allows the selection of an aperture size of 32MB, 64MB.
Please refer to section 3-6-2
Memory Hole at 15M-16M
You can reserve this area of system memory for ISA adapter ROM. When this area is
reserved, it cannot be cached. The user information of peripherals that need to use this area
of system memory usually discusses their memory requirements. The settings are: Enabled
and Disabled.
3-6-1 DRAM Timing Setting
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
DRAM Timing Setting
Item Help
Auto Configuration Standard
RAS Active Time 7T
RAS Precharge Time 2T
RAS to CAS Delay 2T
Write Recovery Time 2T
CAS Latency Setting 2.5T
Menu Level >>
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
RAS Active Time
Select the number of SCLKs for an access cycle. The settings are: Auto (Default), 6T, 7T,
5T, 4T.
RAS Precharge Time